TM 10-3930-659-34 4-62. CAB WINDOW GLASS REPLACEMENT. This task covers: a. Removal b. Installation INITIAL SETUP: Equipment Conditions: Tools/Test Equipment: • Front windshield wiper arm removed (if replacing • General mechanic's tool kit (Item 71, Appendix E) front windshield glass) (see TM 10-3930-659-20). • Window glass installation tool kit (Item 72, Appen- • Rear window wiper arm removed (if replacing rear  dix E) window glass) (see TM 10-3930-659-20). References: Personnel Required:  Two • TM 10-3930-659-20 a.  REMOVAL 1.    Using window glass installation tool kit, pull open locking tab (3) of isolator molding (2) around full length of isolator molding. 2.    Pull isolator molding (2) outward and away from window   glass   (1)   to   expose   edge   of   window glass. CAUTION Support   window   glass   as   glass   is removed from isolator molding. 3.    Continue    to    pull    isolator    molding    (2)    while pushing   outward   on   window   glass   (1)   until window glass is removed. 4.    Remove isolator molding (2) from cab (4). 4-234