TM 10-3930-659-34 4-57.  STEERING VALVE REPAIR (Con’t). 10. Install rotor (8) and generator (2) onto drive shaft (7)   and   steering   valve   body   (3).      Ensure   that alinement is as illustrated by lines A, B, and C. 11. Install spacer (9) in rotor (8). 12. Install  new  washer  (10)  and  end  cap  (11)  on  steering  valve  body  (3)  with  seven  screws  (1).    Torque  screws  in crisscross pattern to 125 lb.-in.  (14 N•m). 13.    Torque seven screws (1) again in crisscross pattern to 250 Ib.-in.  (28 N•m). 14.    Remove steering valve body (3) from machinist's vise. FOLLOW-ON TASKS: • Install steering valve (see TM 10-3930-659-20). 4-219