TM 10-3930-659-34 4-57.  STEERING VALVE REPAIR. This Task Covers: a.  Disassembly c.  Assembly b.  Cleaning and Inspection Initial Setup: Equipment Conditions: Materials/Parts: •  Steering valve removed (see TM 10-3930-659-20). •    Dry cleaning solvent (Item 47, Appendix B) •    Steering valve repair kit Tools/Test Equipment: •    General mechanic's tool kit (Item 71, Appendix E) References: •    Vise jaw caps (Item 12, Appendix E) •    TM 9-214 •    Machinist's vise (Item 76, Appendix E) •    TM 10-3930-659-20 •    Torque wrench, 0-300 lb.-in.  (Item 80, Appendix E) General Safety Instructions: •    Dry cleaning solvent is flammable and must not be used near open flame.  Use only in a well-ventilated area. a.  DISASSEMBLY I 1.    Secure steering valve body (3) in machinist's vise with vise jaw caps. 2.    Remove seven screws (1), end cap (11), and washer (10) from steering valve body (3).  Discard washer. 3.    Remove generator (2) and washer (6) from steering valve body (3).  Discard washer. 4.    Remove spacer (9) and rotor (8) from drive shaft (7). 5.    Remove drive shaft (7) from steering valve body (3). 6.    Remove spacer plate (5) and washer (4) from steering valve body (3).  Discard washer. 4-214