TM 10-3930-659-34 4-47. FRONT AXLE ASSEMBLY REPLACEMENT (Con’t). b. INSTALLATION 1. Place front axle assembly (7) on hydraulic jack and position front axle assembly under frame (5). 2. Raise front axle assembly (7) and install on frame (5) with eight bolts (3), 16 washers (4), and eight nuts (6). Torque nuts to 457 lb.-ft.  (620 N•m). 3. Install front wheels (see TM 10-3930-659-20). 4. Remove hydraulic jack from under front axle assembly (7). 5. Remove wooden blocks from fork/boom cylinders (2) and lifting eyes (1), and lower fork/boom assembly and forks to ground (see TM 10-3930-659-10). FOLLOW-ON TASKS: • Remove trestles from under frame. • Install carriage assembly (see TM 10-3930-659-20). • Connect front universal joint (see TM 10-3930-659-20). • Connect front brake hose (see TM 10-3930-659-20). • Fill front differential with oil (see TM 10-3930-659-20). • Install front bottom guard (see TM 10-3930-659-20). • Install boom lock (see TM 10-3930-659-20). • Remove frame locking bar (see TM 10-3930-659-10). 4-177