TM 10-3930-659-34 4-46. ENGINE-TO-TRANSMISSION UNIVERSAL JOINT MAINTENANCE (Con’t). e. INSTALLATION 1. Using suitable lifting device, lift rear of engine approximately 1 in.  (25.4 mm) and position universal joint (3) on drive dampener (1) and transmission assembly (6). 2. Install two rear engine mounting bolts (see paragraph 4-3). 3. Tighten two front engine mounting bolts (see paragraph 4-3). 4. Install universal joint (3) on transmission assembly (6) with four screws (2).  Torque screws to 45 lb.-ft.  (61 N•m). 5. Install six washers (4) and screws (5) on universal joint (3) and drive dampener (1).  Torque screws to 45 lb.-ft. (61 N•m). FOLLOW-ON TASKS: • Install engine hood (see TM 10-3930-659-20). • Install hydraulic reservoir (see TM 10-3930-659-20). • Install window washer bottle and bracket (see TM 10-3930-659-20). • Install left engine upper sideshield (see TM 10-3930-659-20). • Install left engine lower sideshield (see TM 10-3930-659-20). TA708240 4-174