TM 10-3930-659-34 4-46. ENGINE-TO-TRANSMISSION UNIVERSAL JOINT MAINTENANCE (Con’t). a. REMOVAL 1. Remove four screws (2) and universal joint (3) from transmission assembly (6). 2. Remove six screws (5) and washers (4) from universal joint (3) and drive dampener (1). 3. Loosen two front engine mounting bolts (see paragraph 4-3). 4. Remove two rear engine mounting bolts (see paragraph 4-3). 5. Using suitable lifting device, lift rear of engine approximately 1 in.  (25.4 mm) and remove universal joint (3) from drive dampener (1). 4-172