TM 10-3930-659-34 4-43. TRANSMISSION INPUT SEAL AND BEARING REPLACEMENT (Con’t) 2. Using  mechanical  puller,  remove  seal   (5)   and bearing (6) from bearing cover (2). Discard seal. 3. Remove   retaining   ring   (7)   from   bearing   cover (2). b. INSTALLATION 1. Install retaining ring (7) in bearing cover (2) 2. Using arbor press, install bearing (6) and new seal (5) in bearing cover (2) 3. Install new gasket (3) and bearing cover (2) on transmission assembly (4) with eight screws (1) Torque screws to 18 lb.-ft. (24 N.m) FOLLOW-ON TASKS: • Install torque converter (see paragraph 4-38). 4-167