| |
TM 10-3930-659-34
4-32.
CONVERTER RELIEF VALVE PRESSURE CHECK.
This Task Covers: Pressure Check
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Parking brake set (see TM 10-3930-659-10).
•
Rags (Item 43, Appendix B)
•
Frame locking bar installed (see TM 10-3930-
•
Four preformed packings
659-10).
•
Left engine upper sideshield opened (see TM 10-
Personnel Required: Two
3930-659-10).
References:
•
Left engine lower sideshield removed (see TM 10-
3930-659-20).
•
TM 10-3930-659-10
•
TM 10-3930-659-20
Tools/Test Equipment:
•
General mechanic's tool kit (Item 71, Appendix E)
•
Adapter (Item 1, Appendix E)
•
Adapter (Item 4, Appendix E)
•
Cap (Item 11, Appendix E)
•
Pressure gage (Item 31, Appendix E)
•
Union (Item 74, Appendix E)
NOTE
A suitable container should be used to catch any draining hydraulic fluid. Ensure that all spills are
properly cleaned.
PRESSURE CHECK
1. Remove screw (1) and clamp (2) from
transmission thermal bypass valve (4). Move
hose (3' aside.
4-138
|
