TM 10-3930-659-34 4-29.  STARTER MOTOR REPAIR (Con’t). NOTE Note location of terminal to aid during assembly. 31. Remove seven screws (61) and preformed packings (60) from starter housing (4).  Discard preformed packings. 32. Remove terminal (62) and preformed packing (63) from starter housing (4).  Discard preformed packing. 33. Remove field coil (65), four poles (59), insulator (58), and insulator (64) from starter housing (4). b.    CLEANING AND INSPECTION WARNING Paint thinner burns easily and fumes can explode.  Paint thinner's flash point is 100°F (380C).  DO NOT smoke or allow flame nearby when using paint thinner.  Failure to follow this warning may result in serious injury or death to personnel. 1. Clean parts (except armature, bushings, field coil, starter motor solenoid, wicks, and brushes) with paint thinner. Dry with clean rags. 2. Clean all other parts with clean, dry rags. 3. Inspect all parts for cracks, breaks, burns, and wear.  Replace defective parts. 4-120