TM 10-3930-659-34 4-29. STARTER  MOTOR REPAIR (Con’t). 22. Remove plug (45) and gasket (46) from housing (9).  Discard gasket. NOTE Note position of locknut on shaft of plunger to aid during assembly. 23. Remove locknut (47) and plunger (38) assembly from housing (9).  Discard locknut. 24. Remove retaining ring (44), retainer (43), spring (42), retainer (41), boot (40), and washer (39) from plunger (38). 25. Remove ring (54) and shaft (53) from housing (9).  Discard ring. 26. Remove preformed packing (52) from shaft (53).  Discard preformed packing. 27. Remove lever (56) and preformed packing (57) from housing (9).  Discard preformed packing. 28. Remove bushing (55) from housing (9). 29. If cup (51) is damaged, remove cup and wick (50) from housing (9). 4-118