TM 10-3930-659-34 4-18.  ENGINE OIL PUMP INTAKE TUBE REPLACEMENT. This task covers: a. Removal b. Installation INITIAL SETUP: Equipment Conditions: Materials/Parts: • Engine oil pan removed (see paragraph 4-17). • One preformed packing Tools/Test Equipment: • General mechanic's tool kit (Item 71, Appendix E) • Torque wrench, 0-175 Ib.-ft.  (Item 81, Appendix E) a. REMOVAL 1.    Remove   two   screws   (4),   washers   (5),   and engine  oil  pump  intake  tube  (1)  from  engine  oil pump (3). NOTE Preformed packing may stay in engine     oil     pump     or     remain     with engine oil pump inlet tube. 2.    Remove  preformed  packing  (2)  from  engine  oil pump (3) or engine oil pump intake tube (1).  Dis card preformed packing. b. INSTALLATION 1.    Install preformed packing (2) on engine oil pump Intake tube (1). 2.    Install engine oil pump intake tube (1) on engine oil  pump  (3)  with  two  washers  (5)  and  screws (4). Torque screws to 35 lb.-ft.  (47 N.m). FOLLOW-ON TASKS: • Install engine oil pan (see paragraph 4-17). 4-74