TM 10-3930-659-34 4-14. ENGINE FRONT COVER REPLACEMENT (Con’t). 4. Release fuel injection lever spring from spring retaining bracket (13). 5. Remove two nuts (17), lockwashers (16), engine front cover (3), and gasket (10) from two studs (19) and engine block (9).  Discard gasket and lockwashers. 6. If damaged, remove two studs (19) from engine block (9). 7. Remove two screws (15), washers (14), spring retaining bracket (13), access cover (12), and gasket (11  )  from engine front cover (3).  Discard gasket. CAUTION DO   NOT   pry   or   press   against   engine   front   cover   with   excessive   force   when removing front seal.  Engine front cover is made of aluminum and excessive force may cause damage. 8.     Remove front seal (18) from engine front cover (3).  Discard front seal. TA708102 4-63