| |
TM 10-3930-659-34
4-14.
ENGINE FRONT COVER REPLACEMENT.
This Task Covers:
a.
Removal
b
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Engine oil filler neck removed (see TM 10-3930-
•
Sealing compound (Item 15, Appendix B)
659-20).
•
Grease (Item 33, Appendix B)
•
Accelerator cable and spring removed (see TM 10-
•
Rags (Item 43, Appendix B)
3930-659-20).
•
Marker tags (Item 49, Appendix B)
•
Alternator removed (see TM 10-3930-659-20).
•
One front seal
•
Magnetic pickup removed (see TM 10-3930-659-20).
•
One preformed packing
•
Engine oil pressure regulating valve removed (see
•
Two gaskets
paragraph 4-15).
•
Eight lockwashers
•
Crankshaft dampener removed (see paragraph 4-7).
References:
Tools/Test Equipment:
•
TM 10-3930-659-20
•
General mechanic's tool kit (Item 71, Appendix E)
•
Crankshaft front oil seal driver (Item 26, Appendix E)
•
Torque wrench, 0-300 lb.-in. (Item 80, Appendix E)
a.
REMOVAL
NOTE
All screws should be tagged to aid during
installation. Screws must be installed in
the same position on engine oil pan and
engine front cover.
1.
Remove six screws (8) and lockwashers (7)
from engine oil pan (6) and engine front cover
(3). D card lockwashers.
2.
Remove two screws (5) and washers (4) from
Engine front cover (3).
3.
Remove ten screws (2) and washers (1) from
engine front cover (3).
TA708101
4-62
|
