| |
TM 10-3930-659-34
4-13.
TAPPETS REPLACEMENT.
This Task Covers:
a.
Removal
c. Installation
b.
Cleaning and Inspection
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Cylinder head assembly removed (see para-
•
Lubricating oil (Item 39, Appendix B)
graph 4-5).
•
Dry cleaning solvent (Item 47, Appendix B)
Tools/Test Equipment:
General Safety Instructions:
•
General mechanic's tool kit (Item 71, Appendix E)
•
Dry cleaning solvent is flammable and must not be
•
Outside caliper micrometer (Item 9, Appendix E)
used near open flame. Use only in a well-ventilated
•
Compressor unit (Item 16, Appendix E)
area.
•
Compressed air used for cleaning purposes should
Personnel Required:
Two
never exceed 30 psi (207 kPa).
a.
REMOVAL
NOTE
Note position of tappets to aid during installation. Tappets must be installed in
thesame position on engine block.
Remove 12 tappets (2) from engine block (1).
TA708099
4-60
|
