TM 10-3930-659-34 4-12.  ENGINE ROCKER ARM ASSEMBLY AND PUSHRODS MAINTENANCE (Con’t). e.  INSTALLATION CAUTION Pushrods must be installed in the same position as removed.  Failure to follow this caution may result in damage to parts. 1.  Position 12 pushrods (4) on cylinder head (5). NOTE Ensure that cutouts in engine rocker arm assembly aline with screw holes In shaft supports. 2.  Install engine rocker arm assembly (1) on cylinder head (5) with sixwashers (3) and screws (2).  Torque screws to 35 lb.-ft.  (47 N•m). TA708098 FOLLOW-ON TASKS: • Adjust cylinder head valves (see TM 10-3930-659-20). • Install engine rocker arm cover and vent tube (see TM 10-3930-659-20). 4-59