| |
TM 10-3930-659-34
4-11.
REAR OIL SEAL REPLACEMENT.
This Task Covers:
a.
Removal
c. Installation
b.
Cleaning and Inspection
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Flywheel and ring gear removed (see para-
•
Loctite adhesive (Item 2, Appendix B)
graph 4-9).
•
Abrasive cloth (Item 9, Appendix B)
•
Rags (Item 43, Appendix B)
Tools/Test Equipment:
•
Dry cleaning solvent (Item 47, Appendix B)
•
General mechanic's tool kit (Item 71, Appendix E)
•
Electric drill, portable (Item 20, Appendix E)
General Safety Instructions:
•
Twist drill set (Item 21, Appendix E)
•
Dry cleaning solvent is flammable and must not be
•
Seal inserter and remover (Item 38, Appendix E)
used near open flame. Use only in a well-ventilated
•
Puller kit (Item 50, Appendix E)
area.
a.
REMOVAL
1.
Drill three equally spaced holes through rear oil
seal (1).
TA708090
4-50
|
