| |
TM 10-3930-659-34
4-9.
FLYWHEEL AND RING GEAR REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Tools/Test Equipment:
• Drive dampener removed (see paragraph 4-45).
• General mechanic's tool kit (Item 71, Appendix E)
Personnel Required: Two
• Torque wrench, 0-175 lb.-ft. (Item 81, Appendix E)
• Flywheel guide studs (two) (Figure C-1, Appendix C)
a.
REMOVAL
1.
Remove two screws (6) from flywheel (3).
2.
Install two flywheel guide studs (7) on flywheel (3).
3.
With assistant holding flywheel (1), remove two screws (5).
4-44
|
