TM 10-3930-659-34 4-7. CRANKSHAFT DAMPENER MAINTENANCE (Con’t). 5. Remove screw (7) and washer (6) from crankshaft dampener (1). CAUTION DO NOT apply force to outer edge of crankshaft dampener. Force applied against outer edge will damage crankshaft dampener. 6. Using puller kit, remove crankshaft dampener (1) from crankshaft (8). 7. Remove key (5) from crankshaft (8). e. INSTALLATION NOTE Ensure that crankshaft dampener is properly alined when positioning crankshaft dampener on crankshaft. 1. Install key (5) and crankshaft dampener (1) on crankshaft (8). 2. Apply   Loctite   adhesive   to   threads   of   screw   (7),   and   install   washer   (6)   and   screw   on   crankshaft   dampener (1).Torque screw to 110 lb.-ft. (149 N.m). TA708079 4-34