TM 10-3930-659-34 4-4. ENGINE MOUNTS REPLACEMENT (Con’t). NOTE Take up slack on lifting device as necessary to remove engine mounting plate and resilient mount. 3. Remove two screws (17), washers (16), engine mounting plate (15), and resilient mount (14) from engine assembly (5) and frame bracket (18). 4. Position resilient mount (14) on engine mounting plate (15) and install engine mounting plate on engine assembly (5) with two washers (16) and screws (17).  Torque screws to 105 lb.-ft.  (142 N•m). 5. Install engine mounting plate (15), washer (13), screw (12), washer (20), and nut (19) on frame bracket (18). Torque nut to 270 Ib.-ft.  (366 N•m). 6. Remove suitable lifting device and lifting sling from engine assembly (5). FOLLOW-ON TASKS: • Install engine hood (see TM 10-3930-659-20). 4-13