| |
TM 10-3930-659-20
17-26. FORK SPACING CYLINDER HOSES AND LINES REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Parking brake set (see TM 10-3930-659-10).
• Rags (Item 27, Appendix C)
•
Frame locking bar Installed (see TM 10-3930-
• Marker tags (Item 33, Appendix C)
659-10).
• Six preformed packings
•
Front bottom guard removed (see paragraph 14-9).
•
Loader frame cover removed (see paragraph 14-11).
References:
• TM 10-3930-659-10
Tools/Test Equipment:
General mechanic's tool kit (Item 44, Appendix F)
NOTE
•
Four fork spacing cylinder hoses, lines, and fittings are removed and Installed the
same way. One set of hoses, lines, and fittings Is illustrated.
•
All hoses and lines should be tagged before removal. Refer to paragraph 2-18 for
tagging Instructions.
•
A suitable container should be used to catch any draining hydraulic fluid. Ensure
that all spills are properly cleaned.
a.
REMOVAL
1.
Remove hose (13) and preformed packing (14) from fork spacing cylinder (1). Discard preformed packing.
2.
Remove hose (13) and preformed packing (10) from line (2). Discard preformed packing.
3.
Remove screw (12), plate (11), and two clamps (9) from line (2).
4.
Remove screw (3) and two clamps (4) from line (2).
5.
Remove hose (8) and preformed packing (7) from line (2). Discard preformed packing.
6.
Remove nut (6) and line (2) from fork/boom assembly (5).
17-82
|