| |
TM 10-3930-659-20
17-11. CARRIAGE ASSEMBLY REPLACEMENT.
This Task Covers:
a. Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Parking brake set (see TM 10-3930-659-10).
•
Grease (Item 23, Appendix C)
•
Fork spacing chains removed (see para-
•
Five locknuts
graph 17-34).Required: Three
•
Fork spacing cylinder removed (see para-
Personnel Required Three
graph 17-33).
References:
•
Forks removed (see paragraph 17-12).
•
TM 10-3930-659-10
Tools/Test Equipment:
•
General mechanic's tool kit (Item 44, Appendix F)
a.
REMOVAL
1.
Remove locknut (5), three washers (2), screw (1), and three spacers (4) from backguard (3). Discard locknut.
2.
Attach suitable lifting device to backguard (3) and raise lifting device enough to support weight of backguard.
3.
Remove four locknuts (9), screws (7), washers (6), and backguard (3) from carriage (8). Discard locknuts.
17-34
|