| |
TM 10-3930-659-20
17-8.
FORKLIFT CONTROL VALVE REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Parking brake set (see TM 10-3930-659-10).
•
Three locknuts
•
Right access door opened (see TM 10-
Tools/Test Equipment:
3930-659-10).
•
Right side cab skirt removed (see paragraph
•
General mechanic's tool kit tem 44, Appendix F)
14-6).
•
Fork/brake hydraulic pump outlet-to-forklift
control valve hose and fittings removed
References:
(see paragraph 17-14).
•
TM 10-3930-659-10
•
Forklift control valve-to-plate hoses and fittings
removed (see paragraph 17-19).
•
Forklift control valve-to-transmission clutch cutoff
valve hose and fittings removed (see para-
graph 17-20).
a.
REMOVAL
NOTE
Locknut and screw on right side of
forklift truck should be removed first.
1.
Remove three locknuts (2), screws (4), and rod
end bearings (3) from forklift control valve (1).
Discard locknuts.
2.
Remove two screws (6), washers (5), and forklift
control valve (1) from bracket (7).
TA707629
17-26
|
