| |
TM 10-3930-659-20
16-13. INSIDE CAB HEATER HOSES AND HEATER CONTROL VALVE REPLACEMENT.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP:
Equipment Conditions:
Tools/Test Equipment:
•
Engine cooling system drained (see paragraph
•
General mechanic's tool kit (Item 44, Appendix F)
5-38).
•
Cab fresh air filter door opened (see TM 10-3930- References:
659-10).
•
TM 10-3930-659-10
a.
REMOVAL
1.
Loosen two clamps (2) and remove hoses (3
and 4) from nipples (1).
2.
Remove two nipples (1) from cab floor (5).
TA707003
16-43
|
