| |
TM 10-3930-659-20
16-8.
REAR WINDOW WIPER MOTOR REPLACEMENT.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP:
Equipment Conditions:
Materials/Parts:
• Battery disconnect switch in OFF position
•
Marker tags (Item 33, Appendix C)
(see TM 10-3930-659-10)
• Cab rear panel removed (see paragraph 14-22). References:
• TM 10-3930-659-10
Tools/Test Equipment:
• General mechanic's tool kit (Item 44, Appendix F)
a.
REMOVAL
NOTE
All wires should be tagged before removal. Refer
to
paragraph
2-18
for
tagging Instructions.
1.
Remove retainer (6), washer (7), and plate (4)
from rear window wiper motor (8).
2.
Disconnect three terminal leads (3) from connec
tor (2).
3.
Remove two screws (1) and rear window wiper
motor (8) from cab (5).
b.
INSTALLATION
1.
Install rear window wiper motor (8) on cab (5)
with two screws (1).
2.
Connect three terminal leads (3) to connector
(2).
3.
Install plate (4) on rear window wiper motor (8)
with washer (7) and retainer (6).
FOLLOW-ON TASKS:
•
Install cab rear panel (see paragraph 14-
22).
TA706989
16-27
|
