| |
TM 10-3930-659-20
14-21. DASH PLATE REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Tools/Test Equipment:
•
Turn signal/emergency flashers switch removed (see
• General mechanic's tool kit (Item 44, Appendix F)
paragraph 6-19).
•
Transmission oil temperature gage removed (see
paragraph 6-7).
•
Fuel gage removed (see paragraph 6-7).
•
Horn switch removed (see paragraph 6-41).
•
Fault monitor module removed (see paragraph 6-5).
a.
REMOVAL
Remove four screws (2) and dash plate (3) from
dash housing (1).
b.
INSTALLATION
CAUTION
Use care not to overtighten screws when
Installing dash plate. Dash plate Is plastic
and
may
be
damaged
if
screws
are
overtightened.
Install dash plate (3) on dash housing (1) with
four screws (2).
FOLLOW-ON TASKS:
•
Install fault monitor module (see paragraph 6-5).
•
Install horn switch (see paragraph 6-41).
•
Install fuel gage (see paragraph 6-7).
•
Install transmission oil temperature gage (see paragraph 6-7).
•
Install turn signal/emergency flashers switch (see paragraph 6-19).
TA706831
14-46
|
