| |
TM 10-3930-659-20
14-17. ENGINE HOOD REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Coolant overflow hose removed from brackets (see
• Eight locknuts
•
Air cleaner intake cover removed (see para-
General Safety Instructions:
graph 5-9).
•
Engine hood handle removed (see para-
• Allow exhaust system to cool before attempting to
graph 14-18).
service.
•
On-board crane removed (see paragraph 15-1).
Tools/Test Equipment:
•
General mechanic's tool kit (Item 44, Appendix F)
a.
REMOVAL
WARNING
Allow exhaust system to cool before removing engine hood. Failure to follow this
warning will result In serious burns.
1.
Remove four locknuts (9), screws (2), and washers (1) from support beam (10) and engine hood (3). Discard
locknuts.
2.
Remove four locknuts (7), screws (4), eight washers (5), and engine hood (3) from two flanges (6). Discard
locknuts.
3.
If damaged, remove support beam (10) from support cylinder (8).
b.
INSTALLATION
1.
If removed, position support beam (10) on support cylinder (8).
2.
Install engine hood (3) on two flanges (6) with eight washers (5), four screws (4), and new locknuts (7).
3.
Install support beam (10) on engine hood (3) with four washers (1), screws (2), and new locknuts (9).
14-40
|