| |
TM 10-3930-659-20
14-9.
FRONT BOTTOM GUARD REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Tools/Test Equipment:
•
Parking brake set (see TM 10-3930-659-10).
• General mechanic's tool kit (Item 44, Appendix F)
•
Battery disconnect switch in OFF position (see
• Hydraulic Jacks, 12 ton (two) (Item 21, Appendix F)
TM 10-3930-659-10).
References:
Personnel Required: Two
•
TM 10-3930-659-10
a.
REMOVAL
1.
Position two hydraulic Jacks under front bottom
guard (2). Raise hydraulic jacks until weight of
front bottom guard Is supported.
2.
Remove six screws (4) and washers (3) from
front bottom guard (2) and frame (1).
TA706812
14-24
|
