TM 10-3930-659-20 12-19.    STEERING CYLINDERS REPLACEMENT (Con't). b. INSTALLATION 1. Apply a coat of grease to two pins (6). 2. Install steering cylinder (9) and washers (8), as noted during removal, on rear frame (2) with pin (6), washer (5), and screw (1). 3. Pull rod end of steering cylinder (9) out of housing. 4. Install steering cylinder (9) and washers (8), as noted during removal, on forward frame (7) with pin (6), washer (5), and screw (1). 5. Install hose (3) on steering cylinder (9). 6. Install hose (4) on steering cylinder (9). FOLLOW-ON TASKS: • Lubricate steering cylinder pivots (see LO 10-3930-659-12). • Install remote steering cylinder lubrication hoses and fittings (see paragraph 12-15). • Install transmission side guards (see paragraph 14-7). • Remove frame locking bar (see TM 10-3930-659-10). TA707591 12-53