TM 10-3930-659-20 12-19.    STEERING CYLINDERS REPLACEMENT. This task covers: a. Removal b. Installation INITIAL SETUP: Equipment Conditions: Materials/Parts: • Frame  locking bar installed (see TM  10-3930-   • Grease (Item 23, Appendix C) 659-10). • Rags (Item 27, Appendix C) • Transmission side guards removed (see para- graph 14-7). • Personnel Required:  Two • Remote steering cylinder lubrication hoses and fittings removed (see paragraph 12-15). References: • TM 10-3930-659-10 • LO 10-3930-659-12 Tools/Test Equipment: • General mechanic's tool kit (Item 44, Appendix F) NOTE • Right and left steering cylinders are removed and installed the same way.  Right steering cylinder is illustrated. • A suitable container should be used to catch any draining hydraulic fluid.  Ensure that all spills are properly cleaned. a. REMOVAL 1. Remove hose (3) from steering cylinder (9). 2. Remove hose (4) from steering cylinder (9). 3. Remove two screws (1) and washers (5) from pins (6). NOTE Quantity of washers (8) may vary.  Note quantity and location of washers to aid during installation. 4. Remove two pins (6), washers (8), and steering cylinder (9) from rear frame (2) and forward frame (7). 12-52