TM 10-3930-659-20 12-15.    REMOTE STEERING CYLINDER LUBRICATION HOSES REPLACEMENT. This task covers: a. Removal b. Installation INITIAL SETUP: Equipment Conditions: Materials/Parts: • Frame locking bar installed (see TM  10-3930- • Rags (Item 27, Appendix C) 659-10). • Transmission  side guards removed (see para-References: graph 14-7) . • Transmission bottom guard removed (see • TM 10-3930-659-10 paragraph 14-8). Tools/Test Equipment: • General mechanic's tool kit (Item 44, Appendix F). NOTE A suitable container should be used to catch any draining hydraulic fluid.  Ensure that all spills are properly cleaned. a. REMOVAL NOTE • Perform steps 1 through 5 to remove right steering cylinder lubrication hose. • Perform steps 6 through 9 to remove left steering cylinder lubrication hose. 1. Remove hose (10) and elbow (9) from right steering cylinder (8). 2. Remove hose (10) from fitting (13). 3. Remove screw (12), clamp (11), and hose (10) from forklift truck. 4. Remove fitting (15) from fitting (13). 5. Remove nut (14) and fitting (13) from bracket (3). 6. Remove hose (5) and elbow (6) from left steering cylinder (7). 7. Remove hose (5) from fitting (4) and remove hose from forklift truck. 8. Remove fitting (1) from fitting (4). 9. Remove nut (2) and fitting (4) from bracket (3). 12-42