| |
TM 10-3930-659-20
CHAPTER 11
WHEEL AND TIRE MAINTENANCE
11-1.
WHEEL AND TIRE MAINTENANCE.
This Task Covers:
a.
Removal
c.
Installation
b.
Repair
Initial Setup:
Equipment Conditions:
Tools/Test Equipment:
•
Parking brake set (see TM 10-3930-659-10).
• Hydraulic jack, 12 ton (Item 21, Appendix F)
• Wheel lift truck (Item 46, Appendix F)
Personnel Required: Two
• Torque wrench, 0-600 lb.-ft. (Item 53, Appendix F)
• Socket wrench set, X in. drive (Item 55, Appendix F)
References:
• Wheel alining studs (see TM 10-3930-659-10)
•
TM 9-2610-200-14
•
TM 10-3930-659-10
a.
REMOVAL
1.
Loosen, but do not remove, 16 capscrews (4) from wheel (2).
2.
Position hydraulic jack under axle (1) near wheel (2) to be removed and raise forklift truck until wheel is off
ground.
3.
Position wheel lift truck under wheel (2) to be removed.
TA706747
11-1
|
