TM 10-3930-659-20 10-13.    BRAKE VALVES-TO-HYDRAULIC RESERVOIR HOSES AND FITTINGS REPLACEMENT (Con't). 7. Remove adapter (12) and preformed packing (13) from hydraulic reservoir (14).  Discard preformed packing. 8. Remove adapter (8) and preformed packing (7) from right brake valve (6).  Discard preformed packing. b. INSTALLATION 1. Install new preformed packing (7) and adapter (8) on right brake valve (6). 2. Install new preformed packing (13) and adapter (12) on hydraulic reservoir (14). 3. Install two new preformed packings (9 and 11) and hose (10) on two adapters (8 and 12). 4. Install new preformed packing (21) and adapter (20) on left brake valve (5). 5. Install new preformed packing (15) and adapter (16) on hydraulic reservoir (14). 6. Install two new preformed packings (17 and 19) and hose (18) on two adapters (16 and 20). FOLLOW-ON TASKS: • Fill hydraulic reservoir with hydraulic fluid (see TM 10-3930-659-10). • Bleed brakes (see paragraph 10-17). • Install cab skirts (see paragraph 14-6). • Close right and left engine upper sideshields (see TM 10-3930-659-10). • Install conveyorized fork attachments on side of forklift truck (see paragraph 17-13). • Remove frame locking bar (see TM 10-3930-659-10). TA706956 10-40