TM 10-3930-659-20 10-3. PARKING BRAKE PEDAL AND HANDLE REPLACEMENT (Con't). 7. Remove nut (13), washer (14), two screws (17), and bracket (18) from bracket (15). 8. Remove parking brake pedal (16) and parking pawl (11) from bracket (18). 9. Remove parking brake light switch (see paragraph 6-55). NOTE Note length of adjusting screw from bottom of head to nut before removing. 10. Remove adjusting screw (20) and nut (19) from bracket (18). 11. Remove pin (12) from parking brake pedal (16) b. INSTALLATION 1. Install pin (12) on parking brake pedal (16). 2. Install nut (19) on adjusting screw (20) as noted during removal. 3. Install adjusting screw (20) on bracket (18). 4. Install parking brake light switch (see paragraph 6-55). TA706934 10-10