TM 10-3930-659-20 8-2. REAR UNIVERSAL JOINTS MAINTENANCE. This task covers: a. Removal b. Installation b. Disassembly e. Installation c. Cleaning and Inspection INITIAL SETUP: Equipment Conditions: Materials/Parts: •    Wheels chocked. • Dry cleaning solvent (Item 31, Appendix C) •    Transmission side guards removed (see para- graph 14-7 ) References: •    Transmission bottom guard removed (see para- graph 14-8). • LO 10-3930-659-12 Tools/Test Equipment: General Safety Instructions: •    General mechanic's tool kit (Item 44, Appendix F) •    Torque wrench, 0-175 lb.-ft.  (Item 52, Appendix F)  · Dry cleaning solvent is flammable and must not be used near open flame.  Use only in a well-ventilated area. a REMOVAL 1. Remove four bolts (5) from universal joint (4) and rear axle (1). 2. Remove four bolts (2) and universal joint (4) from transmission (3). b. DISASSEMBLY 1. Remove eight bolts (6) and two spider bearing assemblies (7) from universal joint (4). 2. If damaged, remove lubrication fitting (8) from universal joint (4). 8-8