TM 10-3930-659-20 8-1. FRONT UNIVERSAL JOINTS AND SUPPORT BEARING MAINTENANCE (Con't). e. INSTALLATION CAUTION Yokes must be alined during Installation.  Failure to properly Install yokes may result In damage to universal joint. 1. Install shaft (12) on front axle yoke (14) with four bolts (13).  Torque bolts to 50 lb.-ft.  (68 N-m). 2. If removed, Install lubrication fitting (11) and pin (9) on support bearing (10). 3. Install support bearing (10) on support (8) with four bolts (17), washers (16), and nuts (15).  Torque nuts to 4. Install yoke (3) on shaft (12) with new retaining ring (7), spacer (6), and bolt (5).  Torque bolt to 170 lb.-ft. 5. Install universal joint (2) on transmission (1) and yoke (3) with eight bolts (4).  Torque bolts to 50 Ib.-ft.  (68 N-m). TA706737 8-6