TM 10-3930-659-20 7-4. TRANSMISSION SHIFT CABLES AND BALL JOINTS REPLACEMENT (Con't). b. INSTALLATION 1. Install two ball joints (2 and 10) on cable (7). 2. Position cable (7) on bracket (6) with one washer (9) on each side of bracket and tighten two nuts (8). 3. Position cable (7) on bracket (5) with one washer (4) on each side of bracket and tighten two nuts (3). 4. Install ball joint (10) on lever (11) with new locknut (12). 5. Install ball joint (2) on bellcrank (1). FOLLOW-ON TASKS: • Adjust transmission shift linkage (see paragraph 7-5). • Install cab skirts (see paragraph 14-6). 7-15