| |
TM 10-3930-659-20
7-3.
TRANSMISSION SHIFT RODS REPLACEMENT (Con't).
16.
If removed, install nut (7), washer (8), and knob (9) on shaft (3).
17.
Install ball (6), spring (5), shaft (3), and retaining ring (4) in cover (2).
18.
Install retaining ring (4) in groove (10) on shaft (3).
19.
Check that shaft (3) engages direction selector lever (1) when indicator springpin (11) is in N (Neutral).
FOLLOW-ON TASKS:
Connect transmission shift cables to bellcrank (see paragraph 7-4).
Adjust transmission shift linkage (see paragraph 7-5).
Install steering wheel (see paragraph 12-2).
TA707328
7-12
|