TM 10-3930-659-20 7-3. TRANSMISSION SHIFT RODS REPLACEMENT (Con't). b. INSTALLATION NOTE Perform steps 1 through 4 only if bushings or bearings were removed. 1. Install two lower bearings (21) on cab floor with four screws (20). 2. Install two upper bearings (16) on steering column flange (19) with four screws (17) and nuts (18). 3. Install speed bushing (27) on speed range selector lever (29) with new springpin (28). 4. Install direction bushing (14) on direction selector lever (1) with new springpin (15). 5. Position direction selector lever (1) and speed range selector lever (29) on cover (2). 6. Install two new indicator springpins (11) into direction selector lever (1) and speed range selector lever (29). 7. Install direction selector lever (1) and speed range selector lever (29) through two upper bearings (16) and lower bearings (21). 8. Lower cover (2) to steering column flange (19). 9. Install two keys (23) on direction selector lever (1) and speed range selector lever (29). 10. Install bellcrank (22) on direction selector lever (1). 11. Install bellcrank (24) on speed range selector lever (29). 12. Install screw (25) on bellcrank (24). 13. Install screw (26) on bellcrank (22). 14. Install cover (2) on steering column flange (19) with two screws (13). 15. Install two knobs (12) on direction selector lever (1) and speed range selector lever (29). 7-11