TM 10-3930-659-20 7-2. TRANSMISSION SHIFT LINKAGE BRACKET REPLACEMENT. This task covers: a. Removal b. Installation Initial Setup: Equipment Conditions: Materials/Parts: • Parking brake set (see TM 10-3930-659-10). • Tie-down strap (Item 32, Appendix C) • Transmission shift linkage disconnected from transmission control valve (see References: paragraph 7-1). Tools/Test Equipment: • TM 103930659-10 • General mechanic's tool kit (Item 44, Appendix F) a. REMOVAL 1. Cut tie-down strap (5).  Discard tie-down strap. 2. Remove two screws (3) and clamps (2) from transmission shift linkage bracket (6).  Move hose (1) and transmission wiring harness (4) aside. 3. Remove screw (7), washer (8), and transmission shift linkage bracket (6) from transmission control valve (9). b. INSTALLATION 1. Install transmission shift linkage bracket (6) on transmission control valve (9) with washer (8) and screw (7). 2. Install two clamps (2) on transmission shift linkage bracket (6) with two screws (3). 3. Install new tie-down strap (5) around hose (1), transmission wiring harness (4), and shift linkage bracket (6). 7-6