TM 10-3930-659-20 6-72. SECONDARY STEERING WIRING HARNESS MAINTENANCE. This task covers: a. Repair c. Installation b. Removal Initial Setup: Equipment Conditions: Materials/Parts: • Negative battery cables disconnected - • Marker tags (Item 33, Appendix C) (see paragraph 6-43). • One lockwasher • Conveyorized fork attachments removed from side of forklift truck (see paragraph 17-13). References: • Right and left engine upper sideshields opened • TM 10-3930-659-10 (see TM 10-3930-659-10). Tools/Test Equipment: • General mechanic's tool kit (Item 44, Appendix F) NOTE • All wires should be tagged before removal.  Refer to paragraph 2-18 for tagging Instructions. • Refer to wiring diagrams for assistance (see paragraph 6- 73). a. REPAIR NOTE • Secondary steering wiring harness does not need to be removed from forklift truck to perform repair. • Repair of secondary steering wiring harness consists of replacement of Identification bands, terminals, and connectors. Refer to paragraph 2-28 for repair instructions. b. REMOVAL 1. Pull back rubber boot (1), and remove nut (2), lockwasher (3), and secondary steering wiring harness terminal lead (4) from solenoid (6).  Discard lockwasher. 2. Remove nut (10) and secondary steering wiring harness terminal lead (5) from solenoid (6). 3. Remove nut (9), wire (8), and secondary steering wiring harness terminal lead (7) from solenoid (6). 6-276