TM 10-3930-659-20 6-66. STE/ICE LOAD CENTER WIRING HARNESS MAINTENANCE (Con't). c. INSTALLATION NOTE Install new tie-down straps as necessary. 1. Position STE/ICE load center wiring harness on forklift truck. 2. Install connector (10) and chain (14) on cab (4) with four screws (13), washers (12), and nuts (11). 3. Install cap (9) on connector (10). 4. Connect five STE/ICE load center wiring harness connectors (6) to STE/ICE chassis wiring harness connectors 5. Connect STE/ICE load center wiring harness connector (7) to load center wiring harness connector (8). (5). TA707910 6-249