TM 10-3930-659-20 6-46. BATTERY DISCONNECT SWITCH REPLACEMENT. This task covers: a. Removal b. Installation Initial Setup Equipment Conditions: Materials/Parts: Negative battery cables disconnected (see para- • Marker tags (Item 33, Appendix C) graph 6-43). • Three lockwashers • Conveyorized fork attachments removed from side of forklift truck (see paragraph 17-13). References: • Right engine upper sideshield opened (see TM 103930-659-10). • TM 10-3930-659-10 Tools/Test Equipment: • General mechanic's tool kit (Item 44, Appendix F) a. REMOVAL NOTE All cables should be tagged before removal.  Refer to paragraph 2- 18 for tagging Instructions. 1. Remove nut (1), lockwasher (2), and battery disconnect switch ground strap (3) from battery disconnect switch (4).  Discard lockwasher. 2. Remove nut (14), lockwasher (13), shunt cable (12), and negative slave receptacle cable (11) from battery disconnect switch (4).  Discard lockwasher. 3. Remove screw (9), lockwasher (8), handle (7), and nut (6) from battery disconnect switch (4).  Discard lockwasher. 6-159