TM 10-3930-659-20 6-43. BATTERY CABLES REPLACEMENT (Con't). NOTE Cable from starter to slave receptacle, wires of engine frame wiring harness,   and   wires   of   engine   wiring   harness   are   Installed   as positive (+) battery cable Is Installed. 2. Install cover (3) on positive (+) battery cable (22) and install battery cable on starter motor solenoid (1) with nut (2).  Install cover over nut. 3. Install cover (5) on positive (+) battery cable (22) with tie-down strap (4). 4. Install positive (+) battery cable (22) on positive (+) terminal of right battery (21) with nut (6).  Install cover (5) over nut. 5. Install conduit on battery cable (14). 6. Route battery cable (14) between left battery (18) and right battery (21). 7. Install cover (8) on negative (-) end of battery cable (14) with tie-down strap (9). 8. Install negative (-) end of battery cable (14) to negative (-) terminal of right battery (21) with nut (7).  Install cover (8) over nut. TA707831 6-153