TM 10-3930-659-20 6-27. WORKLIGHT MAINTENANCE (Con't). 3. Remove lamp (4) from lens (3). 4. If damaged, remove gasket (5) and discard. 5. If removed, install new gasket (5) on housing (7). CAUTION Worklights  use  halogen  lamps.    Avoid  touching  glass  as  skin  oils  will  severely  shorten service life of lamp. 6. Install lamp (4) on lens (3). 7. Connect connector (6) to lamp (4) and ground wire (8) to lens (3). 8. Install lens (3) and bezel (2) on housing (7) with four screws (1). b. REMOVAL NOTE Left  and  right  worklights  are  removed  and  Installed  the  same  way.    Left  worklight  is Illustrated. 1. Disconnect wire (10) from connector (12). 2. Remove wire (10) and grommet (13) from bracket (11). 3. Remove nut (14), lockwasher (15), and worklight assembly (9) from bracket (11).  Discard lockwasher. TA707806 6-120