TM 10-3930-659-20 6-19. TURN SIGNAL/EMERGENCY FLASHERS SWITCH REPLACEMENT. This Task Covers: a.   Removal b. Installation Initial Setup: Equipment Conditions: Materials/Parts: • Battery disconnect switch in OFF position (see •   Marker tags (Item 33, Appendix C) TM 10-3930-659-10). •   One lockwasher Tools/Test Equipment: References: • General mechanic's tool kit (Item 44, Appendix F) •   TM 10-3930-659-10 a. REMOVAL NOTE All  connectors  should  be  tagged  before  removal.    Refer  to  paragraph  2-18  for  tagging Instructions. 1. Remove four screws (5) and lift dash plate (9) from dash housing (2). 2. Disconnect  three  fault  monitor  and  dash  wiring  harness  connectors  (1)  from  turn  signal/emergency  flashers switch (3). TA707783 6-97