TM 10-3930-659-20 6-13. FUSE BLOCK REPLACEMENT (Con't). 2. Disconnect two fuse block connectors (9 and 12) from STF/ICE load center wiring harness connectors (10 and 11). 3. Remove four screws (6), nuts (14), and fuse block (5) from load center plate (4). NOTE Fuse  block  has  ten  10  amp  fuses  and  six  15  amp  fuses.    Note  location  of  fuses  for Installation. 4. Remove 16 fuses (7) from fuse block (5). NOTE Fuse block consists of four sections, each fitted into one another. 5. Disconnect four sections (8) of fuse block (5) as required. 6. Remove wires and terminals of STE/ICE load center wiring harness (13). 7. Replace terminals and connectors on wires of STE/ICE load center wiring harness (13) (see paragraph 2-28). TA707734 6-43