TM 10-3930-659-20 6-12. ELECTRICAL LOAD CENTER REPLACEMENT (Con't). NOTE Relays of electrical load center are removed the  same  way.    Perform  steps  4  and  5  for each of 11 relays. 4. Disconnect load center wiring harness connector (10) from relay (12). 5. Remove  nut  (13),  screw  (11),  and  relay  (12) from load center plate (4). 6. Disconnect  two  24-volt  module  connectors  (15 and    17)    from    load    center    wiring    harness connectors (24 and 26). 7. Remove two nuts (25), screws (16), and 24-volt module (14). 8. Loosen  two  screws  (20)  and  remove  two  load center  wiring  harness  terminal  leads  (21)  from flasher (19). 9. Remove flasher (19) from spring clip (22). 10. Remove  nut  (23),  screw  (18),  and  spring  clip (22). TA707728 6-37