TM 10-3930-659-20 6-7. TRANSMISSION OIL TEMPERATURE GAGE AND FUEL GAGE MAINTENANCE. 5. Remove   two   screws   (11),   bracket   (12),   and transmission oil temperature gage (8) from fault monitor console (7). c. INSTALLATION 1. Position  transmission  oil  temperature  gage  (8) on  fault  monitor  console  (7)  and  install  bracket (12) with two screws (11). 2. Install connector (10) on transmission oil temper ature gage (8). 3. Install socket (4) on transmission oil temperature gage (8). 4. Install fault monitor console (7) on dash plate (9) with four screws (6) and nuts (3). CAUTION Use care not to overtighten screws when Installing dash plate.  Dash plate Is plastic and may be damaged if screws are overtightened. 5. Install dash plate (9) on dash housing (1) with four screws (2). TA707721 6-28