| |
TM 10-3930-659-20
6-7.
TRANSMISSION OIL TEMPERATURE GAGE AND FUEL GAGE MAINTENANCE (Con't).
4.
Remove lamp (5) from socket (4) by pushing lamp in and turning counterclockwise.
5.
Install lamp (5) in socket (4) by pushing lamp in and turning clockwise.
6.
Install socket (4) in transmission oil temperature gage (8).
7.
Install fault monitor console (7) on dash plate (9) with four screws (6) and nuts (3).
CAUTION
Use care not to overtighten screws when Installing dash plate. Dash plate Is
plastic and may be damaged If screws are overtightened.
8.
Install dash plate (9) on dash housing (1) with four screws (2).
b.
REMOVAL
1.
Remove four screws (2) and lift dash plate (9) from dash housing (1).
2.
Remove four nuts (3), screws (6), and fault monitor console (7) from dash plate (9).
3.
Remove socket (4) from transmission oil temperature gage (8).
4.
Remove connector (10) from transmission oil temperature gage (8).
TA707720
6-27
|