TM 10-3930-659-20 6-5. FAULT MONITOR MODULE REPLACEMENT. 4. Position fault monitor console (5) on dash plate (6). 5. Connect warning buzzer connector on fault monitor console (5) (see paragraph 6-38). 6. Connect transmission oil temperature gage connectors and fuel gage on fault monitor console (5) (see paragraph 6-7). 7. Connect seven fault monitor and dash wiring harness connectors (11) to three fault monitor modules (8). 8. Install two sockets (7) on service required indicator (10) and stop engine indicator (9). 9. Lift dash plate (6) from dash housing (1), and install fault monitor console (5) on dash plate with four screws (4) and nuts (3). CAUTION Use care not to overtighten screws when installing dash plate.  Dash plate is plastic and may be damaged If screws are overtightened. 10. Install dash plate (6) on dash housing (1) with four screws (2). TA707715 6-22